You Are Here: Home » Articles posted by harry chan putra (Page 2)
harry chan putra

Number of Entries : 295

Configuration MDU Huawei to olt Huawei

1. Vlan add vlan 3442 smart vlan 3342 smart 2. tag uplink port vlan 3442 0/9 0 port vlan 3342 0/9 0 3. desc vlan vlan desc 3342 description "NODE-B1" vlan desc 3442 description "NODE-B" 4. line profile ont-lineprofile gpon profile-id 16 profile-name " NODE-B" tcont 0 dba-profile-id 300 tcont 1 dba-profile-id 300 tcont 2 dba-profile-id 302 gem add 0 eth tcont 1 gem add 1 eth tcont 1 gem add 2 eth tcont 2 gem ...

Read more

How to Change Huawei ONT Bandwidth in a service port ?

At first login your OLT, then show traffic table index number from your traffic table by bellow command….. display traffic table ip from-index 0 Look like bellow format: Here we found TID 6 for 1 Mbps traffic, now it apply in a service port 426 that was 512 Kbps assigned before. Before status: Apply Command: After Change Traffic table:   ...

Read more

Some troubleshoot commands of Huawei ONT:

Huawei OLT Troubleshoot commands: To show Service port: Huawei-OLT#config Huawei-OLT(config)#display service-port 500 To show Service port by port: Huawei-OLT(config)#display service-port port 0/0/6 ont 0 [Here PortID :6, ONTID :0 ] To Show ONT Info: Huawei-OLT(config)#interface gpon 0/0 Huawei-OLT(config-if-gpon-0/0)#display ont info 6 0 To Show Port State [Port up/down]: Huawei-OLT(config-if-gpon-0/0)#dis ...

Read more

Config state failed in Huawei ONT:

Today i will discuss how to solved Config state failed problem in Huawei ONT. When you found Config state : failed status in Huawei ONT by display ont info, then which type step taken you ? Don’t  worry i will show how to solved this problem………………. This types of problem occur if line-profile should not configured properly, such as same GEM index is apply same PON port in different line-profile. Now show bel ...

Read more

© 2011 Powered By Wordpress, Goodnews Theme By Geeks Docuementation

Scroll to top