You Are Here: Home » GPON » -Gpon Huawei » Some troubleshoot commands of Huawei ONT:

Some troubleshoot commands of Huawei ONT:

Some troubleshoot commands of Huawei ONT:

Huawei OLT Troubleshoot commands:
To show Service port:

Huawei-OLT#config
Huawei-OLT(config)#display service-port 500

To show Service port by port:

Huawei-OLT(config)#display service-port port 0/0/6 ont 0

[Here PortID :6, ONTID :0 ]

To Show ONT Info:

Huawei-OLT(config)#interface gpon 0/0
Huawei-OLT(config-if-gpon-0/0)#display ont info 6 0

To Show Port State [Port up/down]:

Huawei-OLT(config-if-gpon-0/0)#display ont port state 6 0 eth-port all
Huawei-OLT(config-if-gpon-0/0)#display ont port attribute 6 0 eth 1

To Show Statistics:

Huawei-OLT(config-if-gpon-0/0)#display statistics ont-eth 6 0 ont-port 1

To Show Traffic:

Huawei-OLT(config-if-gpon-0/0)#display ont traffic 6 0 1

To Show Optical Info:

Huawei-OLT(config-if-gpon-0/0)#display ont optical-info 6 0    [6=port, 0=ONT id]

To Show MAC Address:

Huawei-OLT#display mac-address port 0/0/6
Huawei-OLT#display mac-address vlan 2816
Huawei-OLT#display mac-address service-port 500

To Reset ONT:

Huawei-OLT(config-if-gpon-0/0)#ont reset 6 0

Add ip on a vlan interface:

Huawei-OLT#config
Huawei-OLT(config)#interface vlanif 2816
Huawei-OLT(config-if-vlanif2816)#ip address 128.144.10.126 255.255.0.0

#########################################

About The Author

harrychanputra.web.id

Number of Entries : 295

Leave a Comment

© 2011 Powered By Wordpress, Goodnews Theme By Geeks Docuementation

Scroll to top