You Are Here: Home » GPON » -Gpon Huawei » Create Traffic Table in Huawei OLT:

Create Traffic Table in Huawei OLT:

Create Traffic Table in Huawei OLT:

At first login your OLT & go to config mode then apply bellow command, All meaning of that configuration are given also under the configuration.Here i will show you how to create traffic table or Bandwidth control list in huawei OLT.

traffic table ip index 6 name 1Mbps cir 1024 cbs 10240000 pir 1024 pbs 10240000 priority user-cos 0 priority-policy local-Setting

Here: we create traffic table for 1Mbps Bandwidth.

[ index 6= index number
1Mbps= name / description
cir=Committed Information Rate(unit:kbps), here we apply 1024 kbps for 1Mbps
cbs=Committed Burst Size(unit:byte), here we apply 10240000 maximum
pir=Peak Information Rate(unit:kbps), here we apply 1024 because highest peak speed
pbs=Peak Burst Size(unit:byte), here we apply 10240000 maximum]

Its Look like bellow format in OLT:

Huawei-OLT(config)#traffic table ip index 6 name 1Mbps cir 1024 cbs 10240000 pir 1024 pbs 10240000 priority user-cos 0 priority-policy local-Setting

Create-Traffic-Table

Now we check that configuration is successfully worked or not ?

Please type bellow command in OLT config mode:

Huawei-OLT(config)#display traffic table ip from-index 0
{ <cr>|to-index<K> }:

Huawei-Traffic-table

we found in yellow color  area which we create, so our configuration is ok.

 

About The Author

harrychanputra.web.id

Number of Entries : 295

Leave a Comment

© 2011 Powered By Wordpress, Goodnews Theme By Geeks Docuementation

Scroll to top