You Are Here: Home » GPON » -Gpon Huawei » Ont Instalation for olt huawei

Ont Instalation for olt huawei

step by step instalation ont to huawi olt.

ont huawei type

HG8110

HG8110

HG8240

HG8240

HG8240 HG8245

HG8240

HG8247

HG8247

 

 

The Huawei ONT is connected to the GPON port of the OLT through optical fibers. The service can be configured only after an ONT is successfully added on the Huawei OLT.

Two ONTs are connected to GPON port 0/1/1. The ONT IDs are 1 and 2, the SNs are 6877687714852900 and 6877687714852901, the management mode is OMCI, and ONT line profile 10 and service profile 10 are bound to the two ONTs.

(1) Add an ONT offline.

If the password or SN of an ONT is obtained, you can run the ONT add command to add the ONT offline.

huawei(config)#interface gpon 0/1

huawei(config-if-gpon-0/1)#ont add 1 1 sn-auth 6877687714852900 omci ont-lineprofile-id 10 ont-srvprofile-id 10

huawei(config-if-gpon-0/1)#ont add 1 2 sn-auth 6877687714852901 omci ont-lineprofile-id 10 ont-srvprofile-id 10

 

(2) Automatically find an ONT.

If the password or SN of an ONT is unknown, run the port portid ont-auto-find command in the GPON mode to enable the ONT auto-find function of the GPON port. Then, run the ont confirm command to confirm the ONT.

huawei(config)#interface gpon 0/1

huawei(config-if-gpon-0/1)#port 1 ont-auto-find enable

huawei(config-if-gpon-0/1)#display ont autofind 1

   //After this command is executed, the information about all ONTs connected to

the GPON port through the optical splitter is displayed.

   ————————————————————————

   Number              : 1

   F/S/P               : 0/1/1

   Ont SN              : 6877687714852900

   Password            :

   VenderID            : HWTC

   Ont Version         : 120D0010

   Ont SoftwareVersion : V1R006C00

   Ont EquipmentID     : 247

   Ont autofind time   : 2011-02-10 14:59:10

   ————————————————————————

   Number              : 2

   F/S/P               : 0/1/1

   Ont SN              : 6877687714852901

   Password            :

   VenderID            : HWTC

   Ont Version         : 120D0010

   Ont SoftwareVersion : V1R006C00

   Ont EquipmentID     : 247

   Ont autofind time   : 2011-02-10 14:59:12

   ————————————————————————

huawei(config-if-gpon-0/1)#ont confirm 1 ontid 1 sn-auth 6877687714852900 omci ont-lineprofile-id 10 ont-srvprofile-id 10

huawei(config-if-gpon-0/1)#ont confirm 1 ontid 2 sn-auth 6877687714852901 omci ont-lineprofile-id 10 ont-srvprofile-id 10

 NOTE:

If multiple ONTs of the same type are connected to a port and the same line profile or service profile is bound to the ONTs, you can add ONTs in batches by confirming the auto discovered ONTs in batches to simplify the operation and increase the configuration efficiency. For example, the preceding command can be modified as follows:

huawei(config-if-gpon-0/1)#ont confirm 1 all sn-auth omci ont-lineprofile-id 10 ont-srvprofile-id 10

 

  1. a.                                          (Optional) Bind an alarm profile to the ONT.

In this example, bind the default alarm profile, namely alarm profile 1 to the ONT.

huawei(config-if-gpon-0/1)#ont alarm-profile 1 1 profile-id 1

huawei(config-if-gpon-0/1)#ont alarm-profile 1 2 profile-id 1

 

  1. 2.                  Confirm that the ONT goes online normally.

After an ONT is added, run the display ont info command to query the current status of the ONT. Ensure that Control flag of the ONT is activeRun State is onlineConfig state is normal, and Match state is match.

huawei(config-if-gpon-0/1)#display ont info 1 1

  ———————————————————————

  F/S/P                : 0/1/1

  ONT-ID               : 1

  Control flag         : active    //Indicates that the ONT is activated.

  Run state            : online    //Indicates that the ONT goes online normally.

  Config state         : normal    //Indicates that the configuration status of the

                                          ONT is normal.

  Match state          : match     //Indicates that the capability profile bound to

                                          the ONT is consistent with the actual capability

                                          of the ONT.

…//The rest of the response information is omitted.

If the ONT state fails, the ONT fails to be in the up state, or the ONT does not match, check the ONT state by referring to the above-mentioned descriptions.

If Control flag is deactive, run the ont activate command in the GPON port mode to activate the ONT.

If the ONT fails to be in the up state, that is, Run state is offline, the physical line may be broken or the optical transceiver may be damaged. You need to check both the material and the line.

If the ONT state fails, that is, Config state is failed, the ONT capability set outmatches the actual ONT capabilities (For details about the ONT actual capabilities, see Reference of GPON ONT Capability Sets). In this case, run the display ont failed-configuration command in the diagnosis mode to check the failed configuration item and the failure cause. Then, rectify the fault according to actual conditions.

 NOTE:

If an ONT supports only four queues, the values of 4–7 of the priority-queue parameter in the gem add command are invalid. After configuration recovers, Config state will be failed.

If the ONT does not match, that is, Match state is mismatch, the port types and number of ports undermatch the actual port types and number of ports supported by the ONT. In this case, run the display ontcapability command to query the actual capability of the ONT, and then select one of the following modes to modify the ONT configuration:

Create a proper ONT profile according to the actual capability of the ONT, and then run the ont modify command to modify the configuration data of the ONT.

Modify the ONT profile according to the actual capability of the ONT and save the modification. Then, the ONT automatically recovers the configuration successfully.

 

 

About The Author

harrychanputra.web.id

Number of Entries : 295

Leave a Comment

© 2011 Powered By Wordpress, Goodnews Theme By Geeks Docuementation

Scroll to top