You Are Here: Home » Router » -Router Juniper » Juniper EX4500 tagged and access port

Juniper EX4500 tagged and access port

Juniper EX4500 tagged and access port

You can use a port on EX4500 as access ( using native vlan ) and trunk.
For our example on a linux box we have a tagged traffic (vlan 100) and untagged traffic ( vlan 10 ):
EX4500 configuration:

[email protected]# set interfaces ge-0/0/8 unit 0 family ethernet-switching port-mode tagged-access
[email protected]# set interfaces ge-0/0/8 unit 0 family ethernet-switching native-vlan-id 10
[email protected]# set interfaces ge-0/0/8 unit 0 family ethernet-switching vlan members 100
[email protected]# run show configuration interfaces ge-0/0/8
unit 0 {
    family ethernet-switching {
        port-mode tagged-access;
        vlan {
            members 100;
        }
        native-vlan-id 10;
    }
}

About The Author

harrychanputra.web.id

Number of Entries : 295

Leave a Comment

© 2011 Powered By Wordpress, Goodnews Theme By Geeks Docuementation

Scroll to top