You Are Here: Home » Load Balance » -LB Prolink » Simple sample Prolink Load Balancing Cryptone.Net

Simple sample Prolink Load Balancing Cryptone.Net

Simple sample Prolink Load Balancing Cryptone.Net

Config Show

System Configuration Setting
=========================================================================
Firmware: Version : TMH121-A V1013-MB2.4-E
Release Date : Jan 24 2006
Printout Time : SUN NOV 25 16:30:40 2007
Time Zone : GM+08:00
Primary NTP IP: time.chttl.com.tw
Secondary NTP : stdtime.gov.hk
=========================================================
LAN status: IP address : 192.168.1.1
MAC address : 00:D0:DA:00:18:51
Mask : 255.255.255.0
Dhcp status : Enable
Dhcp IP Start : 192.168.1.12 – 192.168.1.20
DNS IP address: 203.130.193.74
=========================================================
DHCP
reserved IP: MAC address IP address
———————————–
=========================================================
WAN status: 1.IP address : 192.168.11.100
Netmask : 255.255.255.0
MAC address : 00.d0.da.00.18.52
Connect To : InterNet
Current status: Enable
Healthy Check : NoDefault
Type : Static IP
Primary DNS : 192.168.11.254
Secondary DNS : 203.130.193.74
GatewayAddress: 192.168.11.254
Schedule : Disable
———————————————————
2.IP address : 192.168.12.100
Netmask : 255.255.255.0
MAC address : 00.d0.da.00.18.53
Connect To : InterNet
Current status: Enable
Healthy Check : NoDefault
Type : Static IP
Primary DNS : 192.168.12.254
Secondary DNS : 203.130.193.74
GatewayAddress: 192.168.12.254
Schedule : Disable
=========================================================
Routing setup: Work mode : Basic NAT mode
Static Route :
Network NetMask Gateway Status
——————————————————-
———————————————————
Dynamic Route : Status: Disable
=========================================================
Routing Table: Network NetMask Gateway
—————————————————
0.0.0.0 0.0.0.0 192.168.12.254
192.168.1.0 255.255.255.0 192.168.1.1
192.168.11.0 255.255.255.0 192.168.11.100
192.168.12.0 255.255.255.0 192.168.12.100
=========================================================
IP Filtering: No. IP address Port Pass/Drop status
——————————————————————————————-
=========================================================
Remote
IP Filtering: No. IP address Status
—————————
=========================================================
DoS Defense: Function Parameter Time of Lock Status
———————————————————
Oversized Ping 32 Enable
Port Scan 1000 5 Enable
TCP SYN Flooding (Wan) 1000 5 Enable
TCP SYN Flooding (Lan) 1000 5 Enable
ICMP Flooding (Wan) 1000 5 Enable
ICMP Flooding (Lan) 1000 5 Enable
UDP Flooding (Wan) 1000 5 Enable
UDP Flooding (Lan) 1000 5 Enable
=========================================================
ALG: Options Status
———————————————————
Ipsec Pass Through (Port 500) Disable
PPTP Pass Through (Port 1723) Disable
VOIP Pass Through Disable
=========================================================
Virtual Server: ID Global_Port Local_Port Local_IP_address Status
—————————————————–
———————————————————
Group: StartPort EndPort Local_IP_address TCP/UDP Status
—————————————————–
=========================================================
Multi-DMZ Host: No. DMZ_Host_IP_address IP_address_from_ISP Status
—————————————————–
———————————————————
Dynamic-IP-DMZ: Wan HOST_IP_address Status
———————————-
1 0.0.0.0 Disable
2 0.0.0.0 Disable
=========================================================
Multi-NAT: No LAN_IP_address NetMask Wan_IP Wan_No
———————————————————
=========================================================
Load Balance: Weight Round Robin
Wan 1: 1
Wan 2: 1
=========================================================
Dynamic DNS: Status : Disable
=========================================================
Proxy Server: Status: Disable
=========================================================
Mail Alert : Status: Disable
=========================================================
URL Filtering : Status: Disable
=========================================================
Throughput
Control : Wan DownLoad(kbits/s) UpLoad(kbits/s) Port Usage% Status
———————————————————
1. 384 64
———————————————————
2. 384 64
=========================================================
WAN CONTROL:
Special : StartPort EndPort Select-WAN Status
Application —————————————-
1000 3127 Wan1 Enable
3129 8079 Wan1 Enable
8081 65000 Wan1 Enable
1 1000 Wan2 Enable
3128 3128 Wan2 Enable
8080 8080 Wan2 Enable
6667 7000 Wan2 Enable
5050 5060 Wan2 Enable
———————————————————
IP binding : No Start-Remote-IP End-Remote-IP StartPort EndPort Select-WAN Status
————————————————————————-
1. 0.0.0.0 0.0.0.0 1000 3127 Wan1 Enable
2. 0.0.0.0 0.0.0.0 3129 8079 Wan1 Enable
3. 0.0.0.0 0.0.0.0 8081 65000 Wan1 Enable
4. 0.0.0.0 0.0.0.0 1 1000 Wan2 Enable
5. 0.0.0.0 0.0.0.0 3128 3128 Wan2 Enable
6. 0.0.0.0 0.0.0.0 8080 8080 Wan2 Enable
7. 0.0.0.0 0.0.0.0 6667 7000 Wan2 Enable
8. 0.0.0.0 0.0.0.0 5050 5060 Wan2 Enable
———————————————————
Special IP : Start-IP-Address End-IP-Address WAN Status
Assignment ——————————————–
=========================================================
QoS IP Control: Local_IP_address DownLoad(kbits) UpLoad(kbits) Wan-Apply Min/Max Status
————————————————————————
=========================================================
Remote Control: Status: Disable
=========================================================
MAC IP binding: Status : Enable
Selection: BLOCK all packets
which were not in the following list
MAC-Address IP-Address

About The Author

harrychanputra.web.id

Number of Entries : 295

Leave a Comment

© 2011 Powered By Wordpress, Goodnews Theme By Geeks Docuementation

Scroll to top