2010 – Geeks Documentation

Learning MSAN

Posted by: harry chan putra Posted date: December 24, 2010 In: Router | comment : 0

DSLAM ZTE

Posted by: harry chan putra Posted date: December 12, 2010 In: -Dslam Zte, Dslam | comment : 0

###################################################################### # # # Welcome to ZTE Full Service Access Platform # # # # Press Return to get started # # # # Copyright 2005-2009 , ZTE Co.,Ltd. # # # ###################################################################### Login: ...

Simple sample Prolink Load Balancing Cryptone.Net

Posted by: harry chan putra Posted date: December 12, 2010 In: -LB Prolink, Load Balance | comment : 0

Config Show System Configuration Setting ========================================================================= Firmware: Version : TMH121-A V1013-MB2.4-E Release Date : Jan 24 2006 Printout Time : SUN NOV 25 16:30:40 2007 Time Zone : GM+08:00 Primary NTP IP: time.chttl.com.tw Secondary NTP : stdtime.gov.hk ...

Router Vertex Filter

Posted by: harry chan putra Posted date: December 10, 2010 In: -Router Vertex | comment : 0

### IP FILTERING & MASQUERADING RULES ### ipchains -A input -j DENY -s 0.0.0.0/0 137 -d 0.0.0.0/0 137 -p icmp ipchains -A input -j DENY -s 0.0.0.0/0 137 -d 0.0.0.0/0 137 -p tcp ipchains -A input -j DENY -s 0.0.0.0/0 137 -d 0.0.0.0/0 137 -p udp ipchains -A input -j DENY -s 0.0.0.0/0 138 -d 0.0.0.0/0 138 -p udp ipchains -A input -j DENY -s 0.0.0.0/0 138 -d 0.0.0.0/0 138 -p icmp ipchains -A input -j DENY - ...

MikroTik Wireless Configuration

Posted by: harry chan putra Posted date: December 01, 2010 In: Router | comment : 0

Setup uses Safe Mode. It means that all changes that are made during setup are reverted in case of error, or if Ctrl-C is used to abort setup. To keep changes exit setup using the ‘x’ key. Choose options by pressing one of the letters in the left column, before dash. Pressing ‘x’ will exit current menu, pressing Enter key will select the entry that is marked by an ‘*’. You can abort setup at any time by pre ...

ZXDSL 9210 Commissioning Manual

Posted by: harry chan putra Posted date: August 06, 2010 In: -Dslam Zte, Dsl, Dslam | comment : 0

Basic Command Login : edsl Password: edsl Login to the ZXDSL CLI console, default username is edsl and the password is edsl. DSL#Show card Show all of the card and their status on the ZXDSL 9210 DSL# erase Delete all of the configuration that contain on the ZXDSL 9210. Please be careful to used this command, because it’s will erased all of the configuration on your system. DSL#reboot Reboot the ZXDSL 9210 ...

L3Switch Hp Simple Configuration

Posted by: harry chan putra Posted date: March 27, 2010 In: --Switch HP, Switch | comment : 0

<L3SW-D1-XXXXX-PDC-HP>display current-configuration # version 5.20, Release 2208P01 # sysname L3SW-D1-XXXXX-PDC-HP # irf mac-address persistent timer irf auto-update enable undo irf link-delay # domain default enable system # telnet server enable # management-vlan 61 # dot1x # vlan 1 name "DEFAULT_VLAN" # vlan 61 name "MGT-SWITCh" # vlan 2516 name "XXXXX" # vlan 2537 name "XXXXX" # vlan 2538 name ME_X ...