You Are Here: Home » Router » -Router Vertex » Forget Your Password? Vertex

Forget Your Password? Vertex

 

For 1500/2500 Series Router User

While proceeding procedure herebelow, setting will be returned to initialization mode.
INIT: version 2.77 booti <— strike Ctrl C
INIT: Entering runlevel:
(none) login: root —> Access to “Root” account
Password: vertex25 —> Password is “vertex25″
login[9]: root login on `ttyS0′
cat: /etc/HOSTNAME: No such file or directory
# savecfg —> If saves, all mode will be retured to initialization mode
# reboot —> Reboot the equipment and password will be “vertex25″
For 3000 Series Router User
While proceeding procedure herebelow, setting will be returned to initialization mode.
[eth0]:00:D0:CB:07:51:89 <— Strike Ctrl C
[eth1]:00:D0:CB:07:51:8A
Extracting configuration
Executing startup.vtysh
(none) login: root —> Access to “Root” account
Password: vertex25 —> Password is “vertex25″
Jul 15 10:49:25 login[26]: root login on `ttyS0′
cat: /etc/HOSTNAME: No such file or directory
killall: zebra: no process killed
(none)# write memory —> If saves, all mode will be returned to initialization mode
Building configuration…
[OK]
(none)# Reboot the reload equipment and strike password “vertex25″ in “root” account.
For V1008 Switch User
While proceeding procedure herebelow, setting will be returned to initialization mode.
INIT: version 2.77 booting <— Strike Ctrl C
INIT: Entering runlevel: 3
(none) login: Access to “Root” account
Password: vertex25
login[9]: root login on `ttyS0′
syslogd: /dev/log128: No such device
SWITCH# write memory
SWITCH# reload —> Reboot the equipment and strike password “vertex25″ in “root” account.
For V1124 Switch User
In case of V1124, without password, initialization mode can not be run.
While booting, access to “S” in boot mode and erase the configuration. OS must be uploaded after the deletion.
If there is no “erase” command, please check if boot loader is 3.08.
Lower version than boot loader 3.08 doesn’t support “erase” command.
For V5124 Switch User
While proceeding procedure herebelow, setting will be returned to initialization mode.
INIT: version 2.77 booti <— Strike Ctrl C
INIT: Entering runlevel: 3
(none) login: root
Password: vertex25
login[9]: root login on `ttyS0′
cat: /etc/HOSTNAME: No such file or directory
# savecfg —> If saves, all mode will be returned to initialization mode
# reboot —> Reboot the equipment and strike password “vertex25″ in “root” account.
For V5000 Series Switch User
While proceeding procedure herebelow, setting will be returned to initialization mode.
INIT: version 2.77 booti —> Strike Ctrl C
INIT: Entering runlevel
Starting system loggers: syslogd
Starting INET services: syslogd
Starting httpd: httpd
login: root
Password: DASAN
cat: /etc/HOSTNAME: No such file or directory
cat: /etc/HOSTNAME: No such file or directory
#
# passwd
Changing password for root
Enter the new password (minium of 5, maximum of 8 characters)
Please use a combination of upper and lower case letters and numbers.
Emter new password: dasan
Warnig: weak password (continuing).
Re-enter new password: dasan
Password changed.
# save_config
Configurations are saved into Flash sucessfully
# reboot —> Reboot the equipment and strike password “dasan” in “root” account.

About The Author

harrychanputra.web.id

Number of Entries : 295

Leave a Comment

© 2011 Powered By Wordpress, Goodnews Theme By Geeks Docuementation

Scroll to top